2 Flute Slot Drills - Aluminium Solutions - Aluminium Milling Solutions - Bigger Range & Better Prices

2 Flute Alu-Eco 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill - AM252 Series (Cutwel Pro)

The Alu-Eco AM252 series uncoated carbide 45 Degree helix cutter has 2 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal ...

Micrograin carbide
Uncoated polished solid carbide
Polished high helix milling cutter for general aluminium and plastic machining
45° Helix
2 Flute
Plain shank

Size

Diameter (mm)	1 - 20
Overall Length (mm)	50 - 100
Flute Length (mm)	3 - 40
Shank (mm)	3 - 20

From £3.68 £3.07

View Products

2 Flute 42 Degree Helix Alu-Cut Uncoated HSS 8% Cobalt Long Length Slot Drill - E2509 (YG-1)

The YG-1 E2509 long series slot drill has 2 flutes and a weldon shank. They range in diameter from 2-20mm and have a special Alu-Cut geometry with a 42 Degree Helix angle. The HSS 8% Cobalt Substrate ...

Exceptional value and tool life.
Available with a weldon shank.
Alu-Cut geomotry makes this cutter ideal for non-ferrous machining.
42° Helix gives deeper flute pockets for quick chip clearance and to prevent flutes clogging.
Wide range of geomotries and sizes available for a variety of milling applications.
Uncoated to prevent 'sticking' of material to cutter.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Size

Diameter (mm)	2 - 20
Overall Length (mm)	54 - 141
Flute Length (mm)	10 - 75
Shank (mm)	6 - 20

From £15.23 £12.69

View Products

2 Flute 42 Degree Helix Alu-Cut Uncoated HSS 8% Cobalt Long Length Slot Drill - E2464 (YG-1)

The YG-1 E2464 standard length slot drill has 2 flutes and a weldon shank. They range in diameter from 1-32mm and have a special Alu-Cut geometry with a 42 Degree Helix angle. The HSS 8% Cobalt Substr...

Exceptional value and tool life.
Available with a weldon shank.
Alu-Cut geomotry makes this cutter ideal for non-ferrous machining.
42° Helix gives deeper flute pockets for quick chip clearance and to prevent flutes clogging.
Wide range of geomotries and sizes available for a variety of milling applications.
Uncoated to prevent 'sticking' of material to cutter.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Size

Diameter (mm)	1 - 32
Overall Length (mm)	49 - 133
Flute Length (mm)	3 - 53
Shank (mm)	6 - 32

From £11.65 £9.71

View Products

2 Flute Lapped 50 Degree Helix Carbide A+ Aluminium End Mill - APFE2 (Korloy)

The Korloy APFE2 series A+ mirror finish aluminum cutter has 2 flutes and a plain shank. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ rang...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

U-Shaped flute design for extreme quality surface finish.

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	2.5 - 20
Overall Length (mm)	50 - 100
Flute Length (mm)	8 - 45
Shank (mm)	6 - 20

From £26.94 £22.45

View Products

2 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E48 (YG-1)

The E5E48 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 2 flute cutters have lapped flutes for exceptional surface finish and are ideal on Aluminium and Non-Ferrous m...

Suitable for high speed machining in aluminium and other non-ferrous machining.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Wide cut geometry, ideal for plastics such as ABS, acrylic and non-ferrous metals.

Cylindrical relief reduces chipping of corner edges.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	3 - 20
Overall Length (mm)	50 - 92
Flute Length (mm)	5 - 26
Shank (mm)	6 - 20

From £11.86 £9.88

View Products

2 Flute Lapped Alu-Power Carbide Slot Drill - E5D71 (YG-1)

The E5D71 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 2 flute cutters have lapped flutes for exceptional surface finish and are ideal on Aluminium and Non-Ferrous m...

Suitable for high speed machining in aluminium and other non-ferrous machining.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Wide cut geometry, ideal for plastics such as ABS, acrylic and non-ferrous metals.

Cylindrical relief reduces chipping of corner edges.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	1 - 20
Overall Length (mm)	50 - 110
Flute Length (mm)	3 - 55
Shank (mm)	6 - 20

From £17.66 £14.72

View Products

MITUTOYO 0-6"/0-150mm DIGITAL CALIPER - WAS £171.17 NOW £89.00 - VIEW NOW
OFFER ENDS TOMORROW

We'd like to thank all our customers for their business during 2024, and we wish everyone a very happy Christmas and New Year.

2 Flute Slot Drills - Aluminium Solutions

Cutwel

MITUTOYO 0-6"/0-150mm DIGITAL CALIPER - WAS £171.17 NOW £89.00 - VIEW NOWOFFER ENDS TOMORROW

We'd like to thank all our customers for their business during 2024, and we wish everyone a very happy Christmas and New Year.

2 Flute Slot Drills - Aluminium Solutions

MITUTOYO 0-6"/0-150mm DIGITAL CALIPER - WAS £171.17 NOW £89.00 - VIEW NOW
OFFER ENDS TOMORROW